

| Standard configuration |
|
①Tension seat; ②Push and pull meter; ③Three claw forceps; ④Tension forceps; ⑤Bottom fabric jig; ⑥Correction weight; ⑦Outer size: 280×220×780mm |
|
Operational guidance |
|
①Install the fixture with the test button and lock the test sample to the base. |
|
②Put down the clamp, fasten the button and pull it up. Each button can bear at least 17 pounds pulling force (i.e. 7.72kg) and need to keep 10 seconds, without any traces of loosening or breakage. At the same time, at least 20 buttons should be tested at the same time. |
|
③If one of the buttons is loosened or damaged or must be retested, it must be retested. |
+86-0595-68902555
闽公网安备 35058302350905号